How much aisle space should we allow for our forklift in Sarasota?

Aisle width is set by the lift truck: counterbalance trucks typically need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle equipment about 5–6 feet. Confirm the requirement for your actual truck, pallet and turning arrangement. Aisle width drives storage density more than almost anything else, so we show its effect in the CAD layout.

How much does pallet rack cost?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote. We separate the material, delivery and installation scope so you can compare the proposed arrangement before ordering.

Can you handle design, supply and installation?

Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The agreed layout guides assembly, with racking anchored to the floor and load plaques identifying the planned capacities. We coordinate the work sequence with your receiving and operating schedule.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs and direct access to every pallet. Pushback stores two to six pallets deep with LIFO by SKU; pallet flow suits FIFO and dated stock; drive-in suits bulk quantities of a few SKUs. Choose cantilever for long loads and carton flow for case picking. We compare the alternatives against your inventory and handling equipment in the layout.

How can we confirm our pallet position count before buying?

The number of pallet positions depends on clear height, aisle width and the forklift serving the rows. Our free CAD layout gives the exact planned count before you buy. Send building dimensions, columns, door locations, pallet sizes and inventory counts so receiving and dispatch space remain part of the calculation.

Sarasota, Florida

Drive-In Rack in Sarasota, FL

Name: Tampa Pallet Racks
Address: 7402 N 56th St., Tampa, FL, 33617, US
Telephone: (813) 723-3771
Price range: $$

Bulk supply reserve can be concentrated in lanes rather than scattered over multiple single-deep rows. For a Sarasota operation, the immediate question is how to keep receiving, storage, and dispatch working in the space already available. Drive-in rack reduces the number of aisles by allowing a forklift to enter a lane of pallet-support rails. It suits large quantities of the same item when deep reserve storage matters more than individual pallet access.

We plan drive-in rack for buildings around Clark Road using your inventory profile and handling equipment, not an assumed layout. Send your floor plan and load details for a free consultation, a CAD drawing, and an itemized quote before choosing the system.

(813) 723-3771

Why Sarasota Warehouses Work With Us

Clark Road and Fruitville connect industrial activity with I-75 and the wider Sarasota delivery market. A Sarasota storage plan needs to respect that setting without assuming every building or business is the same. We review the space available for receiving, working aisles, and dispatch alongside the storage area, using the measurements and operating details your team provides.

As a division of Warehouse Equipment & Supplies Co., Tampa Pallet Racks brings the rack selection, CAD layout, pricing, and installation planning into one conversation. For commercial supply, light manufacturing, and regional distribution operations near Fruitville corridor, that means comparing the proposed drive-in rack arrangement with how stock actually moves, rather than buying capacity that is difficult to use. Drive-in earns its space when a few compatible SKUs account for substantial reserve inventory. We do not recommend hiding mixed items in deep lanes if your crew needs to retrieve them separately throughout the day.

You can ask about revisions before placing an order, confirm the scope in the itemized quote, and discuss future additions at the same time. We keep the discussion practical: access, load capacity, receiving space, and the next step for your Sarasota warehouse.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Local areas served include Clark Road, Fruitville corridor, Sarasota Commerce Park.

commercial supply

light manufacturing

and regional distribution

How Drive-In Rack Works

Forklifts enter storage lanes, reducing aisle space for large quantities of the same SKU.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the deep-lane storage. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help keep lift-truck traffic clear of the storage structure.

What a Drive-In Rack Project Includes

A Sarasota drive-in rack project starts with a phone consultation and the information your team can share from the building. We collect the lift truck width, mast and overhead-guard dimensions, pallet footprint, load height, and heaviest pallet. These determine lane width, rail spacing, and vertical clearance. Inventory counts matter just as much: a lane dedicated to one item needs enough compatible stock to fill it. We distinguish LIFO drive-in from two-ended drive-through access before drawing the storage block.

Your CAD plan shows lane depth, rail elevations, entry aisles, protection, and total pallet positions. The quote identifies frames, support rails, brackets, guide rails where specified, and guards. Compare the reserve block with selective storage on the same footprint, including the time and space needed for trucks to enter lanes rather than relying on a general percentage saving. For a location around Clark Road, include entrances, columns, and outbound staging on the plan so the storage arrangement fits the whole operation.

Installation includes alignment of frames and rails and checks for the intended pallet and lift truck. Operating instructions should cover the loading sequence, lane entry, and inspection for impact damage. Plan receiving and work zones before delivery, and confirm the schedule and any required phased installation with the project quote. You receive a documented configuration to review with your team and a clear point of contact for questions about the quoted system.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (813) 723-3771

Recent Pallet Rack Projects

A look at recent pallet rack installations across the Tampa Bay area.

Selective Pallet Racking

Selective pallet racking fitted with wire decking across each level.

Selective Racking with Wire Decking

Selective pallet racking fitted with wire decking on each level, installed under a wood-truss roof.

Carton Flow Racking

Pallet racking set up with carton flow roller lanes on the lower levels.

Drive-In Pallet Racking

Drive-in pallet racking built with deep bays that store pallets several positions deep.

Selective Pallet Racking with Wire Decking

Selective pallet racking fitted with wire decking across each level.

Selective Pallet Racking

Selective pallet racking installed across a warehouse.

Selective Pallet Racking

Selective pallet racking fitted with wire decking.

Selective Pallet Racking

Selective pallet racking in a warehouse.

Push Back Pallet Racking

Push back pallet racking with nested carts that store pallets several deep from one aisle.

Selective Pallet Racking

Selective pallet racking set up along a warehouse wall.

View More Projects

Get a Drive-In Rack Quote for Your Sarasota Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (813) 723-3771.

Tampa Pallet Racks

7402 N 56th St.

Ste 355-580

Tampa, FL 33617

(813) 723-3771

Monday - Friday: 7:00 AM - 7:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Tampa Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.